There may be a time where you need to know how the sensor numbering corresponds to the connectors on the Shoto HDK.

Here's the pinout for the 13 sensor flex assembly:

Pin 1 starts on the right side of the top connector if the Shoto board is facing up. Pins alternate as the pin number increases, with pin 2 on the opposite side of pin 1:

Pin 1:

Pin 2:

...and onward to 43


J1 pinout shown here (inverted due to 2D view, labeled with net name):

Pinout for J1 tabulated below:


Pinout for J2 is:

Keep in mind there is a silkscreen layer on the back of each sensor assembly that
designates the specific sensor connected to the Shoto HDK. Both J1 and J2 are listed; the corresponding sensor number is determined depending on which side the sensor flex cable is connected.

That about wraps it up!

As always, we are available for general inquiries using the chat button on the bottom right of this page.

Did this answer your question?